--- roofing plate glazed tile roll forming machinery Introduction: 750 of the roof panel roll forming machine contour plate, the device is solemn elegant, beautiful novel, and smooth appearance, uniform corrugated, utilization rate is high, strength, producing a high degree of automation, low cost, durable. Main parameters:
Control System | PLC Delta Inverter |
Main Frame | 300mm H-Beam |
Main Power | 4 kw |
Pump Power | 4 kw |
Power Supply | 380V, 3-Phase,50Hz |
Forming Speed | 8m/min |
Roll Station | 11 stands |
Roller Diameter | 80mm |
Hydraulic Pressure | 10-12MPa |
Forming Size | 750mm |
Feeding Thickness | 0.3-0.8mm |
Feeding Width | 1000mm |
Backboard Thickness | 14mm |
Chain Size | 20mm |
Cutter Standard | Cr12 |
Roller Standard | Cr12 |
Cr-Plating Size | 0.05mm |
Overall Size | 6500×1300×1500mm |
Total Weight | 4T |
Components of line:
No. | Name | Unit | Qty |
1 | Man-made uncoiler | set | 1 |
2 | Main machine for roll forming | set | 1 |
3 | Control system | set | 1 |
4 | Hydraulic system | set | 1 |
5 | mold pressing machine | set | 1 |
6 | Blade | set | 1 |
Working flow: Decoiler-----feeding------roll forming ------ cutting----output table Pictures for reference:
1. Manual Uncoiler Usage:It is used to support the
Steel Coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T Inner diameter: 500-508mm 2. Feeding Table Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. 3. Hydraulic System Power:4kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. 4.Computer Control Cabinet The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use. PLC:Panasonic/Siemens 5.Cutting System It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment 6.Output Table It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
our recent finished roofing plate glazed tile roll forming machinery pictures
Contact us if you need more details on Glazed Tile Roll Forming Machinery. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roofing Plate Glazed Tile Roll Forming Machinery、Glazed Tile Roll Forming Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Glazed Tile Sheet Roll Forming Machine