roof or wall cladding system Use Machine,glazed tile profile roll forming machine

         Glazed tile profile Roll Forming Machine Finished Products this is one sample panel, we have designer team can design profile for you.     1, Machine specification

No	Item		Parameter	Note
1	Suitable Material	Type	roof roll forming machine supplier	Customized Specs Acceptable
			Customized Profile
		Thickness	0.3-0.7mm
		Yield Strength	235MPA
2	Product Specs	Cover width	Customized Profile
		Length	Any length
3	Power  Specs	voltage	380V/3PH/50HZ	Up to Practical Profile
		Main Motor	3-11KW
		Hydraulic	2.2-5.5KW
4	Machine Specs	Transmission	Chain and Sprocket	Gearbox and Cardan Acceptable
		Structure	Column Block Or Wall Plate
		Shafter	No.45 steel tempered
		Rollers	No.45 steel chrome coated	Cr12 or other acceptable
		Cutting Blade	Cr12 quenched
		Press Mould	Cr12 quenched
		Punch Mould	Cr12 quenched
5	Working Capacity	Forming Speed	15-20m/min for standard solution	Higher Speed Solution Available
		Working Speed	Up to Length-set Cutting
6	Forming Stand		8-48	Up to Practical Profile
7	Forming Shaft Diameter		55-120mm	Up to Practical Profile
8	Type of Cutting		Length-set cutting after roll formed,CR12 mould steel	Pre-cutting acceptable
9	Control System		Mitsubishi PLC and Inverter

  Components of machne

No		Technical Specification
1	Manual Uncoiler	Usage:It is used to support the steel coil and uncoil it in a turnable way.  The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter:  500-508mm
2	Feeding Table	Put the raw material(steel plate) through the beach to manufacture and process,  it can guarantee that the products are neat, parallel and everything is uniformity Please refer to the equipment regulation to know the function of locate angle iron.
3	Main Roll Forming Machine	Material of rollers:45# steel,roller surfaces polishing, hard plating ,  The polished surface and the heat treatment towards the molds also can  keep the molding plate surface smooth and not easy to be marked when it  is being stamped
4	Hydraulic System Computer Control Cabinet	Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to  begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted.  Computed mode has two modes: automatic and manual one. The system is easy  to operate and use PLC:panasonic
5	Shearing Mechanism	It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment
6	Output Table	It adopts welded steel and supported roller to transmit the products, which is used to collect the finished products.

    Detailed Images       Production Flow    Packaging & Shipping Free packaging for you: Standard export packing: GP container ; main machine naked and fastened with iron wire in the container, rollers were painted with oil and packed with plastic film, control box will be packed with carton box       Certifications   Our Services We provide the technical support for whole life.
Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free.
When need the technician to go abroad, we will arrange the technician.
But the buyer should take all the cost, including Visa, Roundtrip ticket,
suitable accommodation and pay the service fee to the technician with $50/days Company Information  We have been established in 1995 as a professional manufacturer of ROLL FORMING MALCHINE. We use AUTO CAD design software. With more than 10 years of experience and strict quality control, our products meet International Standard. We are the leading manufacturer of roll Forming Machine in China.  We manufacture various kinds of roll forming machines for producing such products as Roof Tile, Wall Panel, Roofing Corrugated Sheet, Floor Deck, C & Z Purling, Highway Guardrail, Sandwich Panel, Container Board, Car Panel, Roll Shutter Door, Downspout, Decorated gusset, Steel Pipe, etc.   Trade Shows We go to attend China spring/autumn canton fair very year.  Latest year we also go to attend india canton fair, Vietnam canton fair,  Tailand canton fair, Indoesia canton fair,Brazil canton fiar, Dubai canton fair,  and so on. Hope we will meet each other on canton fair.   FAQ   Q: Can you make the machine according to my design or prototype?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us Q: What do you need to know so that I can have a machine plan from you for our technical people reference?
A: Well, as the basic needed information for designing a machine plan, pls see below details
For the slitting line and cut-to-length: the material type(HR, CR, HDGI, PPGI, SS), thickness and width range, coil weight, cutting speed, slitting numbers(only for slitting line), steel plate required cutting length(only for cut-to-length line)
For the C,Z,W Profile and roof/wall panel roll forming machine: the material thickness range, width range and the profile drawing are required(how many roll forming stands required are depended on the profile drawing)
For the HVAC machine and the stainless steel pipe machine: the wall thickness range and the diameter range of the pipe
Pls also provide us with your special requirements for the machine, for example, you want the machine to be a full-automatic one or semi-automatic one in order to save your procurement budget.
Q: How can we be assured that you will deliver us quality machine with spare parts?
A: We usually require our customers to send the technical people to our factory for checking the quality of the machine before shipping. Considering that the buyer usually is not very familiar with the machine assembling and debugging, so we send the technicians to the buyer`s factory for the installation of the machine provided that the Price Term was conclude on ALL IN basis. In additon, We provide all of our customers with the aftersales-service, its free of charge during the warranty period   Buyer Feedback  This is Ada Yang, welcome to contact me ! E-mail:sale2 at jcxrollformer.com weichat:adayang6929 skype:adayang6929 whatsapp:0086-18034479939    

Contact us if you need more details on Roof or Wall Cladding System Use Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Glazed Tile Profile Roll Forming Machine、Steel Profile Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Glazed Tile Sheet Roll Forming Machine