Roofing Tile Cold Roll Forming Machine with PLC Control System
Basic Info
Model No.: DX840/825
Product Description
Model NO.: DX840/825 Forging Forming Method: Mold Forging Feature: Automation Warranty: 12 Months Advantage: Easy to Maintenance Name: Roofing Tile Cold Roll Forming Machine with PLC Co Material Thickness: 0.3-0.8mm Feeding Width: 1000mm Pump Power: 3 Kw Forming Steps: Upper Level Is 13 Steps, Down Level 15 Steps Trademark: DIXIN Origin: Botou Hebei China Type: Rolling Machine Power Source: Hydraulic Pressure Certification: CCC, SGS, ISO9001, CE Customized: Customized Condition: New Processing Material: Aluzinc/Galvanized Steel/Colored Steel Coil Effective Width: 840mm&850mm Main Motor Power: 4 Kw Shaft Diameter: 75mm Roller Material: 45# Forged Steel, with Hard Chrome Plating Specification: DX840&850 HS Code: 845522 Roofing tile cold Roll Forming Machine with PLC control system
1. Introduce for double layer cold roll Forming Machine
This machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate.
2. Technique parameters
(1) Processing material: Aluzinc/galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 840mm&850mm
(4) Feeding width: 1000mm
(5) Main motor power: 4 kw
(6) Pump power: 4kw
(7) Shaft diameter: 75mm
(8) Forming steps: Upper level is 13 steps, down level 15 steps
(9) Roller material: 45# forged steel, with hard chrome plating
(10) Main frame: 300H steel
(11) Medium plate thickness: 16mm
(12) Control systerm: PLC computer control with inverter
(13) Power supply: 380V, 3 Phase, 50Hz
(14) 0veral sized: 6500mm*1500mm*1300mm
3. Components of line
1. Decoiler 2 units
2. Roll Forming System 1 unit
3. Cutting Device 1 unit
4. Hydraulic Station 1 unit
5. PLC control system 1 unit
6. Runout table 1 unit
4. The structure of machine
1 set of manual decoiler
Un-powered;
Single head;
Max. Capacity: 5000kg;
Coil inner-diameter: 508mm
1 set of main roll forming machines
Steps: 13
Roller Material: 45# steel
Voltage: 380V/50Hz.
Line speed: 12m/min;
Rolling chromium thickness: 0.05 mm
1 set of computer control cabinet
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted.
5.7 inch touch screen, easy to operate
Computed mode has two modes: Automatic and manual one.
1 set of hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.
Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 3kw Hydraulic oil: 40#
1 set of cutting mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine.
Stop to cut, Post cut cutting length tolerance: ± 2mm
Cutting tool material: GCr12 with quenched treatment 60-62° C
1 set of counter
One counter gauges length, pulses, and decides length
1 set of output table
It used to load the forming plate
Contact us if you need more details on Roof Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roll Forming Machinery、Metal Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
1. Introduce for double layer cold roll Forming Machine
This machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate.
2. Technique parameters
(1) Processing material: Aluzinc/galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 840mm&850mm
(4) Feeding width: 1000mm
(5) Main motor power: 4 kw
(6) Pump power: 4kw
(7) Shaft diameter: 75mm
(8) Forming steps: Upper level is 13 steps, down level 15 steps
(9) Roller material: 45# forged steel, with hard chrome plating
(10) Main frame: 300H steel
(11) Medium plate thickness: 16mm
(12) Control systerm: PLC computer control with inverter
(13) Power supply: 380V, 3 Phase, 50Hz
(14) 0veral sized: 6500mm*1500mm*1300mm
3. Components of line
1. Decoiler 2 units
2. Roll Forming System 1 unit
3. Cutting Device 1 unit
4. Hydraulic Station 1 unit
5. PLC control system 1 unit
6. Runout table 1 unit
4. The structure of machine
1 set of manual decoiler
Un-powered;
Single head;
Max. Capacity: 5000kg;
Coil inner-diameter: 508mm
1 set of main roll forming machines
Steps: 13
Roller Material: 45# steel
Voltage: 380V/50Hz.
Line speed: 12m/min;
Rolling chromium thickness: 0.05 mm
1 set of computer control cabinet
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted.
5.7 inch touch screen, easy to operate
Computed mode has two modes: Automatic and manual one.
1 set of hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.
Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 3kw Hydraulic oil: 40#
1 set of cutting mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine.
Stop to cut, Post cut cutting length tolerance: ± 2mm
Cutting tool material: GCr12 with quenched treatment 60-62° C
1 set of counter
One counter gauges length, pulses, and decides length
1 set of output table
It used to load the forming plate
| Model number | DX 840&850 Double Deck Truss Making Machine |
| Rolled material | 0.3-0.8mm thickness, aluminium sheet, galvanized sheet, colored steel sheet and various steel plates |
| Effective width | 840mm&850mm |
| Feeding width | 1000mm |
| Forming steps | upper level is 11 steps, down level 13 steps |
| Roller | 45# forged steel, hard chrome plating within 0.05mm |
| Diameter of shaft | 70mm |
| Main frame | 300H steel |
| Main motor power | 3 kw |
| Pump power | 3 kw |
| Medium plate thickness | 14mm |
| Sprocket chain | 1 inch |
| Drive type | by chain |
| Cutting Blade | Cr12, heat treatment 60-62°C |
| Frequency Converter | It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
Contact us if you need more details on Roof Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roll Forming Machinery、Metal Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Roof &Wall Roll Forming Machine
Premium Related Products
Other Products
Hot Products
312 ridge cap tile roll forming machineRAL PPGI Steel Coils With Top Coating 15-25um , Back Coating 5-15umNew Type!!Downspout forming machine manufacturerdecoiler roll forming machinefunction color steel sandwich panel made in chinaJCX roll shutter door forming machinearch curving roofing forming machine840/900 Double layer tile making machineJCX stone coated tile machinery made in Chinasand panelHighway Rail making machinefloor deck roll forming machineC/Z purlin roll forming machineCorrugated Tile Steel Roof Cold Roll forming machineGlazed Tile Roll Forming MachineSheet Roll forming machine