850 Roll Forming Machine high efficient and safe

 850 Cold Roll Forming Machine Corrugated is the S-Rib (sinusoidal) profile for roofing and cladding applications. The S-Rib comes from the sinus curve and offers very strong structural properties. Corrugated is also the most commonly used roofing profile because of its easy handling, fixing properties and related strength. The 8.5/76 stands for 8.5 corrugations over the width of the sheet. 76 refers to the distance in millimetres between two consecutive curves. The Corrugated profile can be factory cranked, curved and bullnosed to different radii as per the customer’s requirements, it is also good in cases of oil canning. The general width of a 8.5 Corrugated sheet is 610mm cover width and a 10.5 Corrugated sheet is 762mm cover width. Very important with this profile is the amount of rollforming stations and the roll design. This is important as the type of material and thicknesses used in the industry presently and in future, can cause the profile to be very flat if the rollformer is not designed correctly. It is possible that a 17.5mm pitch could be reduced to 12mm or less on poorly designed machines. Particularly when using thin, full hard material from 0.18mm up. One often hears of complaints by clients that their current machines cannot rollform certain thicknesses correctly. Our rollformer is designed to accommodate any possibility of this happening.   Product Description 1, Machine specification

No	Item		Parameter	Note
1	Suitable Material	Type	roof roll forming machine supplier	Customized Specs Acceptable
			Customized Profile
		Thickness	0.3-0.7mm
		Yield Strength	235MPA
2	Product Specs	Cover width	Customized Profile
		Length	Any length
3	Power  Specs	voltage	380V/3PH/50HZ	Up to Practical Profile
		Main Motor	3-11KW
		Hydraulic	2.2-5.5KW
4	Machine Specs	Transmission	Chain and Sprocket	Gearbox and Cardan Acceptable
		Structure	Column Block Or Wall Plate
		Shafter	No.45 steel tempered
		Rollers	No.45 steel chrome coated	Cr12 or other acceptable
		Cutting Blade	Cr12 quenched
		Press Mould	Cr12 quenched
		Punch Mould	Cr12 quenched
5	Working Capacity	Forming Speed	15-20m/min for standard solution	Higher Speed Solution Available
		Working Speed	Up to Length-set Cutting
6	Forming Stand		8-48	Up to Practical Profile
7	Forming Shaft Diameter		55-120mm	Up to Practical Profile
8	Type of Cutting		Length-set cutting after roll formed,CR12 mould steel	Pre-cutting acceptable
9	Control System		Mitsubishi PLC and Inverter

Components of machne

No		Technical Specification
1	Manual Uncoiler	Usage:It is used to support the steel coil and uncoil it in a turnable way.  The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter:  500-508mm
2	Feeding Table	Put the raw material(steel plate) through the beach to manufacture and process,  it can guarantee that the products are neat, parallel and everything is uniformity Please refer to the equipment regulation to know the function of locate angle iron.
3	Main Roll Forming Machine	Material of rollers:45# steel,roller surfaces polishing, hard plating ,  The polished surface and the heat treatment towards the molds also can  keep the molding plate surface smooth and not easy to be marked when it  is being stamped
4	Hydraulic System Computer Control Cabinet	Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to  begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted.  Computed mode has two modes: automatic and manual one. The system is easy  to operate and use PLC:panasonic
5	Shearing Mechanism	It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment
6	Output Table	It adopts welded steel and supported roller to transmit the products, which is used to collect the finished products.

    Processes: Man-made uncoiler—Roll Forming Machine—PLC system—Hydraulic system-Blade—Receiving table         Detailed Images         Production Flow       Packaging & Shipping Free packaging for you: Standard export packing: GP container ; main machine naked and fastened with iron wire in the container, rollers were painted with oil and packed with plastic film, control box will be packed with carton box   Our Services  We provide the technical support for whole life.
Meanwhile, if any parts go broken and not artificial damage, we will send you new ones for free. When need the technician to go abroad, we will arrange the technician.
But the buyer should take all the cost, including Visa, Roundtrip ticket,
suitable accommodation and pay the service fee to the technician with $100/days     Company Information   We have been established in 1995 as a professional manufacturer of ROLL FORMING MALCHINE. We use AUTO CAD design software. With more than 10 years of experience and strict quality control, our products meet International Standard. We are the leading manufacturer of roll Forming Machine in China.       Trade Shows FAQ   Q: What do you need to know so that I can have a machine plan from you for our technical people reference?
A: Well, as the basic needed information for designing a machine plan, pls see below details
For the slitting line and cut-to-length: the material type(HR, CR, HDGI, PPGI, SS), thickness and width range, coil weight, cutting speed, slitting numbers(only for slitting line), steel plate required cutting length(only for cut-to-length line)
For the C,Z,W Profile and roof/wall panel roll forming machine: the material thickness range, width range and the profile drawing are required(how many roll forming stands required are depended on the profile drawing)
For the HVAC machine and the stainless steel pipe machine: the wall thickness range and the diameter range of the pipe
Pls also provide us with your special requirements for the machine, for example, you want the machine to be a full-automatic one or semi-automatic one in order to save your procurement budget.
Q: How can we be assured that you will deliver us quality machine with spare parts?
A: We usually require our customers to send the technical people to our factory for checking the quality of the machine before shipping. Considering that the buyer usually is not very familiar with the machine assembling and debugging, so we send the technicians to the buyer`s factory for the installation of the machine provided that the Price Term was conclude on ALL IN basis. In additon, We provide all of our customers with the aftersales-service, its free of charge during the warranty period Q: What do you mean by the ‘ALL IN PRICE’ as you stated in the quotation file?
A: The ALL IN Price means the quoted price including below items vaule
The complete set of Machine value which covers the spare parts and the moulds if any
The machine packing and the container loading charges
The after-sales service charge for 5% of the machine value
The charges for the machine installation at your factory, we send the technician to your factory free of charge
The ALL IN Price not including below items
The flight ticket back and forth from China to Your country for our engineer or technician to supply the installation service at your factory, and the all of the transportation charges outside of China as well
The expenses of hotel room and foods for our engineer or technicians are not included in the ALL IN Price, which shall be covered by your party
The installation needed materials are belong to the buyer self arrangement items, such as the power supply switch; electrical wire , cable and insulating strung wire piping; air-supply system, air origin Q=0.9stere meters/MIN, P=0.8MPa; gear oil, hydraulic oil; track steel(24kg light track); deep protective barrier.
Q: What is the process for working with the customerized machine?
A: We would encourage you to call or email us so we can explore how we can work together. The order processing procedure usually could be like follows
Inquiry offered by the buyer
The sales representative acquire the detailed machine technical info from the buyer
the technical information is sent from the sales dept. to the technical dept. for studying and work out the machine plan and value
the sales representative get the quotation from the technical dept and send to the buyer
the buyer is welcomed to ask for some amendments on the machine plan according to his best idea
the machine plan keep improving until the buyer is satisfied
contract signing and the buyer is requested to make the deposit for 30% of the total value
the contracted machine starts production
the buyer is requested to come to the seller`s factory to check the machine quality
the buyer is requested to pay for the 70% balanced machine value if the checking result is satisfactory
container shipping for the machine
the seller send the technicians to the buyer`s factory for the installation of the machine and ensure the machine is running well   Buyer Feedback      

Contact us if you need more details on Wall Panels Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 850 Metal Roof、Wall Panels Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Discount Machine